- Fix an internal corner profile (a) into the corner.
Apply a bead of Wetwall Silicone Sealant into one
channel of the profile.
- Remove the protective film from the face of the panel.
- If end cap profiles are required, they must be fitted
to the exposed edge of the panel prior to fixing.
- Apply a bead of Wetwall Silicone Sealant into a
channel of the profile.
- Apply a generous amount of Wetwall Adhesive to
the back of first panel (b) then insert into the corner
profile ensuring there is a 2mm clearance at the
bottom and fix the panel to the wall.
- Apply a second bead of Wetwall Silicone Sealant into
the other channel and fix the second panel (c)
as above.
- Once the panels are fixed sealing must be carried
out as detailed on previous page.
